Can you imagine acquiring a press brake machine that not only delivers consistent accuracy, but also provides double the production as other similar machinery? Not only does the Accurl 3 Axis CNC Press Break machine award high performance-it offers easy maintenance options too! For instance, when you need to switch out components, or specific tools at the front of the machine, the ergonomic design makes this type of changeover very simple! Now, add in the fact that automatic calibration is awarded every time the machine is turned on and you immediately gain some time savings! Programming and navigation features are also user friendly, which gives the operator much more control and freedom! When professionals want machinery that carries 5 stars across the board, they’ll be more than satisfied with this specific machine for the long-term.

STANDARD FEATURES OF THE ACCURL SMARTFAB CNC PRESS BRAKE

  • Height adjustable and movable sliding front support arms.

  • Top and bottom tools are surface hardened by special treatment.

  • Promecam easy clamping system.

  • Delem DA52s CNC controller.

  • CNC controlled strong X=800 mm back gauge.

  • 410 mm throat depth.

  • 2 back gauge fingers.

  • Scales in metric and inches.

  • Crowning system in bottom beam 2500/…/4100 hydraulic crowning and from 600 tn and above motorized crowning is standard.

  • Foot pedal is produced according to CE standards and suitable for single and multiple bends.

  • 2 photocells are placed facing each other for rear guards.

  • Covers for cylinders and top beam.

  • Preadjusted electrical requirements based on customer’s geographical area.

The Right Tools For The Right Solution. Every Time.

REQUEST A QUOTE

ECOPOWER technology(Standby Function):

ACCURL promotes a friendly environmental policy, and, as such, all our equipment features the Standby Function.

The standby function will automatically stop the power after 5 consecutive minutes of inactivity.

  • Main Motor change to Energy-saving Altivar drive.

  • 75% less while idle between bends

  • 20% less during free fall.

  • At least 50% saving when bending. (energy consumption increases as sheet thickness increases.)

  • If delay time at end of bend is composed, then it is 84% less.

  • 70% less consumption during return of the upper beam

DELEM DA52S CNC CONTROL SYSTEM:

  • Numerical, one page programming

  • Quick, one-page programming

  • Hotkey navigation

  • 6,4″ VGA color LCD (TFT)

  • Up to 4 axes (Y1, Y2, and 2 auxiliary axes)

  • Crowning control

  • Tool/material/product library

  • USB, memory stick interfacing

  • Servo, frequency inverter and AC control for back-gauge axis

  • Advanced Y-axis control algorithms for closed loop as well as open loop valves

TABLE VIEW

Model(SC-MB8) 63T×1500 63T×2500 100T×3200 100T×4200 160T×3200 160T×4200 250T×3200 250T×4200 300T×3000 300T×4000 300T×6000 400T×4000 400T×5000 400T×6000
Capacity kN 630 630 1000 1000 1600 1600 2500 2500 3000 3000 3000 4000 4000 4000
Max. Bending
Length
mm 1500 2500 3200 4200 3200 4200 3200 4200 3000 4000 6000 4000 5000 6000
Between
Columns
mm 1100 2060 2700 3700 2700 3700 2700 3700 2500 3150 5050 3150 4050 5050
Max. Shut
Height
mm 430 430 480 480 480 480 480 480 480 480 480 480 480 480
Slide Stroke mm 200 200 200 200 200 200 200 200 200 200 200 320 320 320
Throat Depth mm 370 370 400 400 400 400 400 400 400 400 400 400 400 400
Bolster Width mm 150 150 200 200 200 200 200 200 250 250 250 250 250 250
Down Speed mm/min 100 100 130 130 130 130 110 110 80 80 80 80 80 80
Pressing Speed mm/min 8 8 10 10 10 10 10 10 8 8 8 8 8 8
Return Speed mm/min 100 100 125 125 125 125 110 110 85 85 85 80 80 80
Back Gauge
Stroke
mm 500 500 500 500 500 500 500 500 500 500 500 500 500 500
Outline
Size
L mm 1825 2825 3500 4500 3500 4500 3500 4500 3300 4300 6400 4300 5300 6400
W mm 1650 1650 1650 1650 1650 1650 1730 1730 1950 1950 2000 2100 2100 2100
H mm 2600 2430 2540 2540 2580 2580 2580 2580 2670 2670 2950 3100 3100 3170
Weight kg 4600 5600 8000 9500 10000 12000 15000 17000 20000 22000 30000 27000 32000 38000
REQUEST A QUOTE